Magnetic Drain Sump

Thanks for visiting our site!
Magnetic Drain Sump
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Featured Article :

Numerous gadgets are flowing into the market as a result of man's quest to increase the comfort of his day to day life. Many products have become a part of our daily life due to their capability in extending convenience and comfort to us. Shower heads and steam pumps too make our life more cozy and convenient. Hence consumers have accepted them with open hands.

An energizing bath needs a free flowing shower. Blockages and restricted water flow takes off the pleasure out of bathing. Shower heads have an important part in providing you revitalizing bathing bliss. Many renowned brands produce heads that are efficient and durable. tre marcati curved traditional shower arm, tre mercati overhead, and the Sagittarius Venturi fixed head and arm kit are some of the popular shower heads available in the market. Some heads are incorporated with a concrete gall structure to provide an inhibited flow of water. Penitentiaries and sports houses uses anti vandal shower-heads. Unlike delinquent showers, vandal heads can be installed in an uncovered manner.

Different varieties of shower heads are available in the market. Some produce a strong jet of water while others give out a slow single water stream. There are heads that create water streams to your needed variable patterns. A good quality shower-head is indispensable to complete the most luxurious bathrooms.
Steam pumps hand out a variety of purposes across a number of diverse industries. They are also known as direct acting pumps. Industrial pumps can be made use to blend liquids in large scale food processing units. The task can be done efficiently and fast with the aid of industrial steam pumps.

These are used in residential and commercial locales to drain out flooded areas. They are invaluable for their ability in emptying septic tanks and sump tanks. Steam condensate pumps and centrifugal steam-pumps are the two widely used pumps.

Steam pumps comprises of counter steam and a liquid pumping end. They are built together as a unit. Educating yourself in detail about pumps will serve you positively in many occasions.

You can shop online for Shower Heads and avail great discounts. Click here to know more about Steam Pumps

Guide to Replacing an Oil Filter

Most drivers don't know how to change their car engine's oil. In fact it is a task that is needed after every 6000 miles or 6 months, whichever comes first. Many drivers drive with dirty and old oil which can result in engine degradation. It is not very difficult to change an oil filter and it can be done in DIY style, here is a simple guide. Follow the simple directions.

Things Needed
- New oil filter
- New oil
- New oil cap
- Container for old oil
- Wheelie board
- Jack
- Axle stands
- Spanner or socket set to fit sump plug
- Chain wrench
- Latex Gloves

Directions
Step 1:
It is essential not to do an oil change should within two hours time period of driving the car. Otherwise the dipstick will not show correct reading. A good idea is to run the engine with low revs for couple of minutes before thinning the oil and aiding the oil drain.

Step 2:
The car should be parked on a flat surface, this will ensure the stability of the jack.

Step 3:
Open the bonnet and remove the oil filler cap. It is usually made of plastic and is located on the engine block at the top. Check the air vents in the cap for any blockages and replace the entire cap if blocked.

Step 4:
Locate the oil filter and the sump plug. The sump plug looks like a bolt-head which is usually hexagonal facing downwards or sideways, it is usually located at the rear of the engine. In case these are easily accessible without putting the car on a jack, then skip the steps 5 and 13.

Step 5:
Now, the car has to be raised on a jack from the front end. Leaving the car's weight on the jack for any length of time is not recommended. Thus placing the axle stands under the front axles is important and is a double safety measure.

Step 6:
Unscrew the sump plug anti-clockwise with the spanner/socket set and make the container ready to catch the pouring oil. Keep your head away.

Step 7:
Rotate the sump plug taking it off by hand and let the oil drain down in to the old oil container. Keep observing the container as the oil flow likely moves. The drained oil should be disposed off properly.

Step 8:
The sump plug has a magnetic tip. The oil should be gently wiped off and observe it. If the tip has lots of small metal filings, this is a sign that the engine is degrading. There can be number of reasons for this including rust. Make sure the oil is frequently changed in future.

Step 9:
The oil filter has to be unscrewed anti-clockwise. Hands can be used but a chain wrench is mostly used.

Step 10:
Wipe a thin layer of oil around the rubber seal of the new oil filter for ensuring a perfect contact. Then screw the new filter and tighten it by hand only. Avoid over-tight.

Step 11:
The oil should have completely drained by this point. Replace and tighten the sump plug roughly one half-turn past with the spanner/socket set.

Step 12:
Now remove the jack and axle stands and bring the car back to a level position.

Step 13:
Now, locate and remove the dipstick, wipe off the old oil and replace it.

Step 14:
Pour in the new engine oil and take an interval after a pint or 30 seconds, then check the level of the dipstick. Continue pouring till the oil reaches the upper level on the dipstick.

Step 15:
Finally, replace the engine oil-filler cap.

Step 16:
Start and run the engine for few minutes to check the performance.

About the Author

I have a 1998 acura 3.0 cl 6cyl, the mechanic tells me there is silicone in my oil drain plug, what to do?

I went to get my oil changed and Mr.Lube told me they won't touch my car because my previous mechanic put silicone in my oil drain plug. This was done probably because the threads were worn out. What do I do?
Do I go to a mechanic and get him to re-apply the silicone?
Do I buy a rubber oil drain plug?
I found this and it seems good, but is it what I need (don't know too much about cars):

http://cgi.ebay.ca/Magnetic-Drain-Sump-Oil-Plug-ACURA-RL-CL-TL-RSX-INTEGRA_W0QQitemZ390111664468QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item5ad4779954#ht_1490wt_940

Thanks in advance

If the threads are worn on the oil pan, the new oil plug will do no good. I suggest you take your Acura to your mechanic for an oil change and tell him about the silicone. The quick-lube places are cheap, but they sometimes do more harm than good and usually try to get you to get services you may not need.

Thanks for visiting!