Hold Downs Bolts

Thanks for visiting our site!
Hold Downs Bolts
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Featured Article :

Most of us think that toilet installation is something that's best left to the professionals. This is partially true- if you don't have the time then it's probably better to allow a professional to do the job for you. But if you do have some time on your hands and are willing to invest some effort in a good house project, installing a toilet is a great place to start. In fact, you can have one installed with a few easy steps.

What You Will Need

First of all, you need to get your tools and materials ready before you start the installation process. Most toilets will come with all the parts you need- in any case; you'll require a toilet gasket as well as 5/16 inch bolts to lock the toilet down. If you're replacing an old toilet with a new one, remove the old one by shutting off the water supply and flushing the toilet. Remove any excess water with a bucket. On the bottom of the tank on the left side, you'll find a nut that attaches the water line to the ball cock valve- remove this. You'll also need to remove the two bolts that lock the toilet to the floor.

Once this is done, just lift the toilet up. On the floor, you'll notice a circular flange- this is where your new toilet will be mounted. Put the 5/16 inch bolts in the holes with the heads on the inside, so that they are straight and opposite of each other. Place the new toilet gasket on the flange with the flat side pointing up. Now you just have to put the new toilet on the flange so the bolts come up at the right places. Apply some pressure so that the gasket makes a seal to mount the toilet on the floor.

Time For Lock Down

The next part of your toilet installation is basically locking the toilet into place. You'll need to tighten the bolts with washers and nuts but be careful- over tightening will cause the bowl to crack. You should just get the bolts to be snugly tightened. Now you'll need to install the tank- for this, you'll need to push in the mounting bolts at the bottom, like you did with the flange. In this case, you'll need to place rubber washers to ensure a tight fit. Place a sponge rubber gasket over the discharge tube- this is where the tank and the bowl meet. Make sure the gasket is securely set and the bolts are threaded through the right holes. Tighten these with washers and bolts- if possible, get someone to hold the tank tightly down so you can bolt in snugly.

Now you need to put in one of the most important parts of toilet installation- the toilet handle. Remember these are threaded in reverse.

Next, connect the flapper and chain inside the tank. Once this is done, you're ready to attach the toilet lid to the bowl. There should be a water line ready to go into the underside of the tank- connect this and then turn on the water. Keep an eye out for leaks, and then flush the toilet a few times.

If the bowl retains water with no problems, you're ready to bolt the bowl to the floor. If there are some shakes, you can use rubber shims to stabilize things. Once you've bolted down the bowl, cut the ends of the bolts and put the plastic caps on them. Putting some caulking around the base of the bowl is also a good idea, as it offers an extra water-proof shield as well as extra stability.

That's about it! Your toilet installation is now complete. As you can see, it really just requires a little patience, some very basic tools and a little bit of know-how.

For More information on How to Install toilet [http://topcontractorsonline.com/plumbing/toilet-installation.php] and other do it yourself plumbing hints and tips please visit [http://topcontractorsonline.com/plumbing]

Important Factors To Consider When Buying Motorcycle Fairing Bolts

Motorcycle fairing is one of the most useful innovations made on all types of bikes.  Whether you are a racer, a hobby rider, or a bike enthusiast, a fairing for your motorcycle will always be a good addition.  It can protect you from wayward debris and gusts of air rushing towards you.  It can also improve the aerodynamics of your bike.  But to get the best benefit of the fairing, you need to have reliable motorcycle fairing bolts to hold it down and to keep it secured.  The fairing bolts are very important accessories that will keep you and your machine safer during a ride.  So here are some important things to consider when buying after market bolts and fasteners for your fairing.

One of the first things that you need to consider is the durability of the motorcycle fairing bolts.  Remember that every part of bike will receive much stress and pressure during a ride.  This is particularly true if you are participating in competitive motorcycle races.  That is why you need durable bolts and fasteners that can hold up well with stress.  The most logical decision therefore is to buy pure stainless steel bolts.  Stainless steel can effectively resist corrosion and will not easily break.  Avoid fragile metal alloys and downgraded stainless steel.  These materials will not last and can expose you to greater risk when you ride your bike.  But if you buy pure stainless steel bolts, then you are assured that they will not degrade easily and will last for a longer period.

Another important consideration is the reliability of the vendor selling motorcycle fairing bolts, fasteners, and accessories.  These motorcycle accessories and hardware are widely available in your motorcycle part shops.  But custom made and special bolts are sometimes available only in online bike gear shops.  If you are buying online, all that you can see are pictures and descriptions of the bolt and fastener kit.  You will not be able to personally inspect the bolts for quality issues.  Reputable online vendors however will provide you with specific guarantees for quality.  There are also perfect fitting guarantees and other warranties that the vendor can offer.  Make sure to choose an online vendor that has superior guarantees favorable to you.  This way, if the bolts fail or if they do not fit on your bike, you can easily request a replacement or a refund.

Lastly, consider the color scheme of your bike and match the colors of the motorcycle fairing bolts.  Most fairing bolts today come in various colors.  You can buy a complete kit of bolts that match the color of the fairing.  But you also need to make sure that the material color is durable.  It should be resistant to chipping, peeling, and scratching.  The bolts should be powder coated with TGIC.  This is the industry accepted material color coating for fairing bolts and fasteners.  Make sure that the specs on the kit will indicate the type of coating used on the bolts so you can get a guarantee for your purchase.

About the Author

Are you looking for durable and stylish fairing bolts for your bike. Visit our website today and choose the best motorcycle fairing bolts that would be perfect for your bike.

Why does it always stink at my toliet?

I clean it and mop around it but it always smells like urine. Its nasty. I look down at the covers over the bolts that hold it down. It looks like brown looking stuffs coming out from the covers. I dont understand because its the bolts that look like they are leaking. When I take a bath in there I have to smell urine. Thanks for any answers.

If you only smell urine and not sewage(#2), it's probably not the seal or the bolts. If the toilet is in a small area close to walls, than possible the smell is coming from urine that has splattered on the walls from some badly aimed attempts to hit the commode. You may try some bleach.

AFC East Training Camp Preview: The Top 10 Position Battles
Well, we are a couple of weeks away from training camp, and the season will finally be upon us. Many fans are plotting out strategies for attending and getting news from training camps, so a look at the AFC East's top 10 position battles seemed like a good primer for fans. These battles were rated according to the impact they will have on their respective teams. There might be a dogfight to see ...

Thanks for visiting!