Engine Oil Pan

Thanks for visiting our site!
Engine Oil Pan
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Featured Article :

The almighty oil change is an extremely important preventative maintenance task which must be performed regularly. Your local auto shop can do it for you, or you can learn to perform an oil change for yourself. If you're interested in learning one more DIY skill, here are 10 steps to follow.

1) Start with a warm engine rather than a cold one, but be sure that it is not too hot to touch before you begin the oil change.

2) Put on the emergency brake, put vehicle in "Park" and chock wheels. Use a jack on a level surface, and make sure that it is stable. If there is dirt under the car, get a tarp if you would like to keep your clothes clean.

3) You should have a container which will tolerate the heat and quantity of the lubricant. For normal cars and SUVS, expect to drain 4-6 quarts. Parts stores also sell a lined box to drain the lubricant into, or you can get a metal pan, which is reusable for life.

4) The plug to drain the pan is at the bottom, usually toward the rear or side of the pan. Your Auto parts professional can usually show you the drain plug and filter, or you can consult the vehicle's owner or repair manual.

5) Filters are different for each vehicle, and you should know the model, year and engine of your vehicle before you buy oil and filter. These two must always be changed at the same time.

6) When you pull the plug, everything can come pouring out rather quickly. Be sure that you have your drain pan under the engine BEFORE you begin draining the oil to avoid any nasty spills.

7) Be sure to have the proper size wrench for the plug before you drain the lubricant. Improvised tools are awkward to use and may damage the plug.

Discard the old fluids and products in an environmentally responsible way. There are likely designated disposal stations in your community; ask a local service station if you are unsure.

9) Clean the area where the old filter used to sit on the engine. Before installing the new one, moisten the rubber gasket with a bit of motor oil. Spin the new one on to the place where the old one was. Tighten until there is contact, then screw it on another half turn. Do not over tighten or it may leak, resulting in engine damage.

10) Add the new oil through the top of the engine. This is also a great opportunity to check fittings, fan belts, brake fluid, coolants, power steering fluid, and windshield wiper fluid. These are all important to enhancing the safety and life of your car.

Refer to the vehicle's owner's manual or a parts professional to ascertain the proper amount to put in Do not overfill. When you get a quart from capacity, check the level with the dipstick to get the proper top off amount. Then replace the cap and start the engine. The pressure light should go off in the first few seconds. If it stays on, turn off the engine immediately and look for leaks or improperly installed equipment. If the light goes off, turn off the car, crawl under one more time and check for leaks. If all is okay, you can let the car down off the jack, remove chocks and you are set. Congratulations! You've done it yourself.

When there is no time to personally perform an oil change Bristol area residents can trust in the services of local automotive maintenance professionals. To find one in your area, please visit http://www.meineke-bristol.com/

How to Change Your Own Engine Oil

Most of us know that when the car beeps, it is time to get gas, but that is as far as our narrow scope on good car maintenance goes. For many, a visit to the mechanic only happens when major car problems have occurred. Most mechanics would say that the majority of car problems could be avoided if the car owners only changed their motor oil on a regular basis. With the rising price of gas, many Americans are taking the initiative to learn how to be more car repair friendly in order to avoid spending any extra dollars than they have to on their automobiles.  

Everyone has heard that the first step to maintaining your car’s healthy condition is by changing the motor oil regularly. And we all have seen those signs advertising a 10 minute oil change at local gas stations or quick stop car repairs. But what if there’s a way to save $50 bucks and do it yourself? There is and it’s easy to do. 

Here are the steps you’ll need to get you started in changing your own car’s engine oil.  

The first thing you will need to get started is your car owner’s manual. This will tell you how much and what kind of oil is required. You will need to go down to your local auto parts store and make sure you get the right filter for your vehicle. You will also need to purchase a funnel so that you don’t get any oil spillage on your engine, which could cause major problems. In addition, you will also need a pair of filter pliers or a wrench because sometimes the lid to the oil is stubborn coming off. You will also need the right size socket for your specific vehicle. Note that some cars include the socket with the car’s maintenance kit. If your car doesn’t have this, then you can always find one at the auto parts store. Also, make sure to have a rag around to clean up any accidental spills that may occur. 

Open up the car’s hood and pull your car up onto a ramp. Make sure your emergency brake is on so that the car doesn’t go anywhere while you are changing the oil. Use a drain pan to catch all the dirty oil and place it under the car by the drain bolt. Use a ratchet or a wrench to remove your car’s drain plug bolt. When the oil is drained all the way down to a drip, screw on the drain plug and tighten it with the ratchet or wrench. Next locate your car’s oil filter and use your pliers or wrench to remove it. Before you install the new filter, take some oil and use it as lube on the “o” ring of the filter. Then reinstall the new filter as tight as possible by hand.  

Now that the hard part is done, here comes the easy part. Remove the oil cap from the engine. Place the funnel in the hole and put in the specific amount of oil that your vehicle requires according to the owner’s manual. Screw on the engine oil cap. Start your engine and let it run for a few minutes. Then once you turn off your car, check to see if you have the correct amount of oil in your engine. Congratulations! You have successfully changed your engine oil. 

About the Author

Tim LaGanke, Jr. is president of QuickChange Oil, a 10 minute oil change company in Cleveland, Ohio. QuickChange is currently seeking applicants to own an oil change franchise.
gank@quickchangeoil.com

where can i get an oil pan for my 99 honda prelude sh?

my drain plug warped the threads on the oil pan and ive been told the best thing to do is get a new oil pan...the engine is losing about 1 quart of oil every two weeks...is there any other way of fixing this problem?

try JEGS

Suzuki Kizashi Tops 200 mph Mark, Breaks Land Speed Record at Bonneville
WENDOVER, Utah, Aug. 18, 2010; Piloting American Suzuki Motor Corporation's (ASMC) modified 2010 Suzuki Kizashi Bonneville Special, magazine reporter Sam Mitani injected the Kizashi into the record books (and himself in the 200 mph club) with his 203.720 mph run at this year's Bonneville Speed Week, exceeding the previous record of 202.301 mph.

Thanks for visiting!