Engine Oil Filter

Thanks for visiting our site!
Engine Oil Filter
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Featured Article :

Usually there are three items that will be changed in completing the servicing process such as engine oil, oil filter and air filter.

However, we always forget a few important things that we must remind our mechanics to check before leaving the workshop. The result will be a car breakdown after a few minutes or hours of car service if not.

There are about 10 essential items that need to be checked and added on to your car service - To Do list. Only a few good workshops implement these steps before returning your car back to you, and it should be a good practice that we all remember them. They are:

1) Battery water - Do not just rely on the mechanic to remember to check and top up the water level.

2) Radiator water - Top up the water level or fill up with coolant.

3) Timing belt-This must be checked to confirm whether it is still within the limit before leaving the workshop in order not to get a breakdown.

4) Belting or bearing sound-The sounds of any belting such as alternator belting, compressor belting, power steering belting must be removed and belting must be changed if it is scratched.

5) Air filter housing-Need to be cleaned and any dirt must be removed in order to get smooth engine breathing.

6) Water coolant-To prevent the engine from sudden heat up, the mechanic should use water coolant.

7) Alternator-In order to get a good car condition after service, the mechanic has to confirmed whether this part can still be used or has to be changed.

Any oil-Check the oil level such as gear oil, brake oil and clutch oil.

9) Plug cable-change the plug cable in order to get good firing system.

10) Any hose-Any leaking hose has to be replaced especially the fuel hose before it get burnt.

Get more knowledge on automotive repairs at More useful knowledge

Used Car Engine Oil Filtering Purifier

1. This series designed specially for high voltage oil and oil used in diluted oil station of power plant. The Purifier have obtained country patent (patent no. is ZL200420061086. 0) and suitable for high viscosity oil treatment.
2. As the new patent technology Vacuum-segregating is adopt the separated equipment of inflator (Patent No. ZL200420060968. 5) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect.
3. Using new type of heating equipment (Patent No. ZL02276238. 8), it can reduce heating burthen and extend oil life.
4. The water cycled vacuum-pump from abroad lubricates by coolant (or water) and that it never afraid that air enter in the vacuum-pump. It will solve your problem that the spinning vacuum-pump which using fluid as medium need always exchange oil.
5. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. (spurting prevention Patent No. ZL200420060973. 6)
6. With advantages of no leakage. low noise and long using life, this series of products adopt special high viscosity oil pump which be airproofed by our factory.
7. In order to meet customer's needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good. Simultaneity, when we choose the abroad filter assemblies, the plant could keep oil expedite by equipped high voltage protecting system.
8. The plant is all made of stainless steel without adding antirust so that working uninterruptedly.

About the Author

email:yunengoilpurifier@gmail.com
msn:beruren@live.cn
contact person:ren pan
skype:berurenpan
mobile:86-13983487420
fax:86-23-62940030
phone:86-23-62940030

What engine oil/filter do YOU use?

It's about time for my first oil change in my car (1998 Chevrolet Malibu, 3.1 v6 engine). I'm trying to decide what brand oil and oil filters is best, or what you use on your car. I don't want to settle for the cheap "store brand" oil. I want my car to last as long as possible. Any suggestions would be great! Also, I've been told it's beneficial to change the air filter at the same time frame as you change the oil/filter. Brand suggestions on that would be great as well.

First thing's first: Cheap "store brand" oil is EXACTLY the same as "name brand" oil. The ONLY difference is that by removing the company's name and "sloganeering" (as I like to call it), it costs less to market and therefore, the retailer can charge less for it. Also, to prevent copyright infringement, the "store brand" may, in fact, be better! Some "name brand" oils contain harmful additives that, over time, can damage your engine! Some "store brand" facsimiles actually remove these harmful components making the oil BETTER than the more expensive "name brand" competitors! But, it's up to you since it's nearly IMPOSSIBLE to find out which "store brand" outdoes which "name brand" product! Personally, I use Castrol 10W-30 as they mention on the label "Drive Hard!" which is a marketing ploy that leads you to believe that if you use this oil, you can drive your car like a race car. I wouldn't recommend that course of action.

About the air filter: If you don't put a lot of miles on your vehicle, you only need to replace the air filter every few years. I owned a vehicle for 15 years and only had to replace the filter once! Last mileage readout was only about 25000! (It was a Neon! Good riddance!)

1991 Toyota Tercel from North America - Comments
The vehicle burns oil. Air conditioning doesn't work at all. Wiper fluid spray motor has gone bad. Interior light doesn't work. Speedometer light doesn't work.

Thanks for visiting!