Engine Motor Mounts

Thanks for visiting our site!
Engine Motor Mounts
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Featured Article :

Everyone in the Honda and Acura performance industry that has considered doing a motor swap has come to the problem of choosing which motor mounts to use. The Honda performance scene has grown dramatically over the past 10 years, and has brought light to many new performance parts manufacturers. To be competitive in today's industry, manufacturers must offer a product that will set them apart from all others.

Innovative Mounts has developed a completely new design in their bushings that sets them apart from all others in the industry. Their motor mount bushings are not just a standard flat design where the bushing meets the frame, but a tapered design. This revolutionary tapered bushing design allows the engine to 'pivot' and move naturally with the torque of the engine. This feature allows all of the engine mounts to work as they are designed; relying on each mount to perform their own specific task in keeping the engine in place.

Innovative Mounts has produced engine mounts in both billet and steel, unlike all other manufacturers that only offer mounts in one or the other. Innovative steel motor mounts are available for every conceivable honda chassis and engine setup imaginable. Innovative steel mounts are designed using sophisticated CAD / CAM development processes to offer amazing fitment for both stock replacement and swap mounts.

Innovative billet mount kits are for those who want the extra 'show' factor. These billet motor mount kits are also designed with the same industry leading CAD / CAM process as Innovative's steel offerings, but are available in a machined finish, black anodized, and even custom anodized colors for that one of a kind custom look.

Don't purchase a set of motor mounts for your Honda until you check out all of your options. You may find out down the road that there is a much better set available, and at a much better price. Compare leading mount kits to Innovative Mounts first!

Acura Engine Conversions

An Acura Engine Conversion allows you to save thousands when you upgrade your Acura model. How do you go about doing one? In this article, we will look into how to get a higher-performing car by doing an engine conversion.

The first step is to decide on why you want to do it. Do you want more horsepower for regular motoring or because you are getting set for racing? Once you identify your main goal, you'll be able to identify the type of engine swap that will work best for you.

With your goal in mind, knowing what kind of power you want, order the parts you need for higher performance.

Also make sure that you have all the tools you need for installation. You will need an engine hoist, motor mounts, shift linkage, multiple sizes of wrenches from 12 mm to 17 mm, a tall jack, two or more jack stands, a blowtorch, and axles.

When your parts arrive, create a plan of action. Besides helping you create motivation to complete the project despite possible interruptions by your family, work, and lifestyle, a plan will help you to think out all the necessary steps before you even start. You want to stay on track and you don't want to wander what to do next. This is best accomplished by putting everything in place before you get going. A clear sense of direction is necessary for the success of your Acura Engine conversion.

After removing the factory engine from its casings, clean all the parts, then label them. The better your preparation, the easier the installation. Also, properly recycle the old engine parts, scrapping any corroded parts, cleaning and selling any good parts, and properly disposing, according to state laws, the fluids, broken pieces, and so on.

Install the new engine according to the guidelines that you should receive with your engine kit. Try to do this exactly. Once your new Acura engine is installed, top up all the necessary fluids like transmission fluid, oil, coolants, and washer fluids.

Your success depends on your level of mechanical skills, your ability to follow written directions, and on the engine itself. Some conversions are easy, others pose more of a challenge--for example, sometimes its difficult to remove the pin that holds the shift linkage to the transmission.

Here is a basic checklist that you can use as you go through with your Acura conversion:

I have chosen the best engine for my high performance needs.
I have ordered the engine parts.
I have organized all the tools I need.
I have written down a clear plan of action.
I have prepared the engine that I will install.
I have removed the previous engine.
I have properly labeled and disposed of the previous engine parts.
I have hoisted the new engine into the engine bay.
I have hooked up all the parts of the new engine.
I have refilled all the necessary fluids.
I have broken in the new engine over 500 miles before racing it.

About the Author

It is preferable to get a new engine, but if for reasons of budget constraints you decide to do a swap with a used Acura engine, then check belts, and the alternator and clutch before installation.

CHANGING ENGINE MOTOR MOUNTS???

how hard is too change my front and rear motor mounts on my nissan maxima 96???
what tools and equiptment do i need
and how to do i change them?
do i just lift the engine and unbolt the motor mount screws and then replace the motor mounts? or how?
thnkx

I wish it were that simple but no..its not. You will have to pull the engine completely. You will need an engine hoist, masking tape, wrenches, sockets and a ratchet, and fluids..also wouldnt hurt having help from a mechanically inclined friend. Otherwise find a mechanic that is willing to help you out for cheap.

Vendor Newsmaker Q&A: David Schildge, CRP
Daniel Schildge is the president of CRP Industries.

Thanks for visiting!