Cap Ford Mustang

Thanks for visiting our site!
Cap Ford Mustang
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Account limit of 2000 requests per hour exceeded.

Featured Article :

The check engine light (CEL) is that little annoying light that pops on every once in awhile on your dashboard. That light is like the tip of an iceberg. The reason why it's on lies deep within your vehicle electronic and computer system. The brain of the system is called an electronic control module (ECM) or sometimes called a power train control module (PCM). These units are constantly being fed information from the various sensors, switches, and valves throughout the vehicle.

The ECM is constantly making precise adjustments to the vehicles sensors depending on your acceleration speed, braking, cruising speed, engine temperature and the like. It also communicates with the transmission control module (TCM). The most common reason the light comes is due to the fuel cap not being secured. Yes believe or not that will cause the light to come on. If your CEL does come, check the cap to make sure it's tight. Also check that the tether strap that holds the cap is not caught between the cap and the vehicle.

If this is the case, re secure the gas cap. Then sometime over the next few days the light should reset itself on most vehicles. The ECM could even take a week to reset. This is about the only condition where the light will reset on it's own. Now if that's not the case or there's a noticeable drivability problem, you need to bring your car for service. The ECM stores trouble codes. These codes tell the technician what caused the light to come on.

The trouble codes are a starting point for diagnosing the problem. Sometimes it's pretty simple to diagnose. Other times it can take longer to find the problem than to repair it. An example would be some time of vacuum leak. The hard part would be finding the leak. Replacing a broken vacuum hose usually doesn't take that long.

If your CEL comes and the vehicle has a drivability problem, like hesitation, loss of power, bring it in for service asap. If it seems to be driving ok you, for the most part, have some time to get it in for service so there's no need to panic.

How to Customize an Import Tuner

So you've tacked a three-foot-high metal bar onto the back of your trunk, spent $200 on clear-colored taillights and another $600 on "VTEC" stickers, rented The Fast and the Furious three times, and you say your car still doesn't go any faster?  We're just as baffled as you, but we have a few pointers that might help.

1. Even if the point is to build your own personal Import Tuner, it's critical to start with a decent foundation.  All the lowering, stiffening, and boosting doesn't mean half as much on a car that can't put it to good use, and there are plenty of cheap, good platforms out there.

- What's popular isn't always best.  Sure, you could become Slammed  Honda Import Car Owner #16,384, and you'd be getting a reputable car with one of the world's most tuner-friendly engines.  You'd also have to live with marginal low-end torque (not as easy to upgrade as horsepower), and unless you dip back into the 1990s, wouldn't be getting that car's double-wishbone front suspension, one of the things that made it special.  Like most cars, it's also front-wheel-drive, capping a low glass ceiling on the usefulness of whatever extra power you squeeze out of that little engine.

- Get a rear- or all-wheel-drive car if you plan to go fast.  One set of wheels can only do so much, and overpowered front-drivers simply have lower handling skills all around, not to mention feeling slow-witted and less fun even when driven normally.  And wouldn't you like to give drifting a try?  Some recent RWD cars that sold for less than $30,000: Mazda Miata, Toyota MR2, Ford Mustang, Nissan 350Z, Mazda RX-8, Chevy Camaro, Pontiac Firebird.

- Lighter is better.  Mass is the enemy of all vehicle dynamics: acceleration, braking, roadholding, turning, etc.  Starting light is its own reward, and makes every future mod count that much more.

2. Now for the upgrades themselves.

- The single most beneficial: a turbocharger seen modified on  japanese Import Cars.  Assuming your first wish is to go faster (with the same engine), this exhaust gas-recycling device crams extra air into your engine at higher engine speeds, boosting output of both horsepower and torque.  Superchargers achieve the same basic effect through less-efficient means (since it relies on the engine for power).

- After fortifying your engine is the time to worry about intake and exhaust mods (better cams, headers, air filters, mufflers, etc.)  High-performance / high-strung engines are better equipped to enjoy the benefits of better breathing.

- As far as suspensions and lowering, feel free to go as hard as you can handle.  But build properly, making sure your shocks are at least as aggressive as your springs, since the point of the former is to control the motion of the latter and you don't want your suspension constantly hitting its bump stops.  And don't cut your springs!

- Bigger wheels benefit handling, but there are drawbacks: harder ride, more unsprung mass, more work for your shocks, and lowered resistance to pothole damage.  Depending on how much torque you have on tap, too much traction can also make it hard to provoke wheelspin during launches, damping some fun and delaying the acceleration process.  As a rule of thumb, don't fit a street car with any diameter past the teens, or with tires that have an aspect ratio of less than 40.

- Speaking of tires, no one brand is best, and model lines change names all the time.  Just stay away from low-performance all-season tires (anything with "M+S" stamped on it) and try to stay with tires with a speed rating of H (130 MPH) or higher.  After H comes V, Z, and Y.  Before H comes R, S, and T.  Yes, it doesn't make sense.

- As far as brakes go, bigger rotors help, but also only to a point.  Braking depends just as much on tire traction as the brakes themselves, and again, going bigger also adds more unsprung mass.  Instead, focus on making bum brakes better, i.e. swapping from rear drums to discs (better heat resistance, pedal feel, and stopping ability), or swapping from solid discs to vented ones (better cooling).  Brembo is the standard in aftermarket brake brands.

- Fitting a new set of gears and/or a new final-drive ratio can boost torque and make your engine a little more responsive, at the cost of a little gas, more engine noise, and lowered top speeds (since you run into the redline earlier).

- If all you want is more low-speed muscle (like many motorists), all the tiny engine tweaks in the world won't help you.  Power and torque are different (though related) commodities; what you need is a car with a bigger engine.

- Unless you have a rear-drive car and drive at triple digits, stay away from spoilers.  Specifically, stay away from wings - any high-flying bar that isn't 100% attached to the body.  At low/medium speeds, their main contribution is drag, and on front-wheel-drive cars, the rear downforce they add is actually counterproductive, causing even more understeer than usual.  Spoilers (i.e. the attached-to-the-body kind that you might see on an old Lexus SC400 or V6 Pontiac Firebird), on the other hand, actually improve airflow and are slightly useful.

About the Author

Learn about canine leukemia and canine lupus at the Canine Symptoms site.

I have a fan clutch on my ford mustang that has a screw cap.?

Is this posssible, I am used to a bolt on fan clutch. What the heck is this thing. I cant find a part replacement for it anywhere. It looks like it screws on the water pump

Lots of fords use this type of set up. Auto Zone sells it and rents the tool to remove it.

Gunman robs Sunrise convenience store
When a call went out at 4:39 p.m. July 9, officers were told that a man may have been shot during a robbery at the Farm Store, 1220 Sunset Dr. in Sunrise.

Thanks for visiting!