Aluminum Dip Stick

Thanks for visiting our site!
Aluminum Dip Stick
Checkout Ebay Auctions For The Cheapest Prices

Check out Amazon:

Featured Article :

Employers have been administering drug tests with increasing frequency in the last 20 years or so, for a number of reasons. These include safety, trustworthiness with sensitive information, and health/ insurance costs. Some privacy advocates have protested these policies, especially when they occur randomly rather than due to reasonable suspicion, but employers have found the benefits to be substantial.

Rather than send potential employees (or employees chosen for random testing) to a clinical laboratory, some employers have begun performing their own on-site drug testing. Benefits of on-site drug testing include cost, convenience and accuracy.

The most commonly used method in on-site drug testing is the oral swab. Employers like this method because it costs only about $1.00 for each test. This is a huge amount of savings compared to urine or other lab tests. Additionally, obtaining a sample for testing via oral testing is significantly less embarrassing for employees than obtaining a urine sample. Oral testing is also fast. Instead of waiting 24 to 48 hours for results, an on-site drug test of this kind produces results in only about ten minutes. With an accuracy rate of about 98%, many employers are turning to this quick and cost-effective way to screen their staff.

Other employers prefer the continued use of urine samples. One product used for on-site urine testing is a urine dipstick. By collecting the urine sample in the provided cup, a human resources officer can test the urine for the presence of drugs for up to eight hours. These specially designed cups keep the urine at room temperature for several hours, ensuring a fresh sample.

Cost and convenience are also reasons for on-site drug testing. This may be especially important to small businesses with limited resources. By eliminating potential drug abusers and saving on costs from testing, employers are finding on-site drug testing to be a pleasant alternative to traditional means.

Drug Testing Info provides detailed information about employee, random, high school, hair, and urine drug testing and drug testing kits. Drug Testing Info is the sister site of Prescription Drugs Addiction Web.

Simple Shredded Pork Bbq

Many call it BBQ shredded pork because it looks like shredded pork, but technically it is BBQ pulled pork.  But, if you want call it shredded pork, nobody will care.

Once it’s cooked, the way it got its name is from using your hands, or a fork, to literally twist and pull the pork meat away from the fat, and to separate it from the bone.

The cut of meat ideal for pulled pork comes from the upper part of the shoulder from the front leg of a hog.  It is called the Boston Butt, or pork shoulder.

At your favorite butcher shop, asked them for a bone-in, pork shoulder.  The roast should weigh, ideally from four pounds up to eight pounds.

Before you barbecue, rinse thoroughly and pat dry.  Trim as much excess fat off of it as you can. If you don’t get all the fat, not to worry, you can always remove more after it is cooked.

To get the most out of your cooking experience you will want to add a quality dry rub to the pork shoulder.  Basically, what it does is tenderizes the meat and gives it a tantalizing BBQ taste.

You can go to the grocery store and purchase a pre-packaged dry rub.  Most major grocery stores carry something that will work well with pork.  Talk to the butcher at the store and get a recommendation.

However, I prefer to make my own dry rub and you can create your own, easily. 

Get yourself a fairly good-size plastic marinating pan that has a lid.  Don’t use aluminum foil or pans.  Place the meat in the container and pour, or shake, a generous amount of dry rub on it.  Repeat!

Next, pour a combination of plain yellow mustard and/or honey over the pork.  You may have to heat the honey up to get it to spread properly.  Use a brush and cover all the sides.

Once again, sprinkle dry rub on the meat, but this time don’t rub it in.  Refrigerate overnight with the cover closed tightly on the marinating pan.

• Before you barbecue let the pork sit out for one hour
• Start the barbecue, whether gas grill, charcoal or conventional oven
• Temperature should be set at medium, 325 degrees for the oven  

When barbecuing large cuts of meat, other than the oven, you need to use indirect heat.  If you don’t, you will burn the outside.  And, further the meat will dry out and not be cooked in the center.

For cooking on a gas grill, or the oven, you will need a small single cookie, or cooling rack to set the pork shoulder on, all placed over a shallow pan. Actually, a shallow oven roasting pan will work, too. You don’t want to have to clean up the mess if you don’t do this. 

On the gas grill, you only need to light one side of the grill.  When up to temperature, place the Boston Butt directly on the unlit side of the grill. 

With a charcoal grill, place the lit briquets on one side of the unit.  Place the roast directly on the unlit site of the grill, don’t use the cookie rack and pan.  Don’t use cheap charcoal. This is a long, long cooking time.

Use proper airflow. Bottom vents open when pre-heating, open top vents when cooking on indirect heat.

Once you have everything setup, you want to keep the lids on the barbies, and oven closed.  Don’t turn the pork shoulder while cooking.

You need to mop the pork shoulder to add flavor and moisture to it.  The most convenient way is to use a spray bottle partially filled with fruit juice and apple cider vinegar.

A half cup of juice, apple or orange will probably suffice.  Add a tablespoon of the vinegar.

Here we go with the cooking and the mopping sequence:

• Cook at 325 degrees gas grill, or oven for one hour, 250 for charcoal
• Open lid spray (mop) and lightly mist the on top of the roast
• Cook for another 2 hours and mop again
• Lower temperature to 300 and mop again after 3 hours
• Lower temperature to 250 and cook for another 2 hours
• Total eight hours

Charcoal grills will take longer, more like ten to 12 hours.  You will need to add charcoal along the line.

You won’t be able to do this in the oven, but adding a smoker box to the gas grill will enhance the flavor and get you closer to a real BBQ taste.

Buy a cast iron one, they are the best.  Most hardware, home improvement stores have them.

Along with the smoker box, purchase pre-packaged wood chips.  They come in all kinds of flavors, but you might want to stick to fruit woods for the pulled pork.

Soak the wood chips for at least thirty minutes before putting them in the smoker box.  While you are cooking the pork shoulder, place the box on the lit side of the grill. 

With charcoal grill, simple add the pre-soaked wood chips to the coals.

After you have checked the roast for doneness with a meat temperature, take it off the grill and wrap in aluminum foil.  Let it sit for a least a half hour to 45 minutes before serving.

Now, comes the shredded pork part of it.  Pull apart the crust and remove the bone.  Start separating the meat from the fat.  You can do this by pulling it apart with a fork or using your fingers. It freezes well.

Place the meat on a cutting board and chop it up with a knife. Serve on Texas Toast or eat it by itself with, or without a dipping sauce.  Hope you like this simple shredded pork recipe.

Thom Richards absolutely loves to barbecue for family and friends. Please join me at <a href="http://barbecuegrillsplus.blogspot.com/">Barbecue Grills</a> for all kind of information, recipes, tips to make your barbecuing the best. This article is free for republishing, but the resource links must be retained.

About the Author

Thom Richards absolutely loves to barbecue for family and friends. Please join me at Barbecue Grills for more information about barbecuing.

How to make rust???????

I have tried dipping a nail into salt water and waiting, after a few days the nail became rusty. I tried scraping the reddish stuff off with a knife and crumpled aluminum foil, but nothing changed. Only extremely tiny bits appeared and were stuck to the surface of the bag, so technically I have no rust or Iron Oxide. What did I do wrong.
sorry guys, I know I am really bugging u on this question. I really need the answer though

i dont think you can speed up the process, but rust is formed with wet air, not just water

Depression comparisons keep popping up
Stock charts from the 1930s look very much like today's recovery. The difference is 80 years ago, the market had another major down leg

Thanks for visiting!